Filter
Top Products
© National Instruments Corporation 2-1 PXI-8461 or PXI-8460 and NI-CAN for Windows 98/95
2
Installation and Configuration
This chapter describes how to install and configure the NI-CAN software
for Windows 98/95 and the PXI-8461 or PXI-8460 hardware.
Install the NI-CAN Software
Install the NI-CAN software before you install your hardware.
1. Select Start»Settings»Control Panel.
2. Double-click on the Add/Remove Programs icon in the Control Panel
to launch the Add/Remove Programs applet. A dialog box similar to
the one in Figure 2-1 appears.
Figure 2-1.
Add/Remove Programs Properties Dialog Box