Filter
Top Products
Chapter 2 Installation and Configuration
© National Instruments Corporation 2-5 PXI-8461 or PXI-8460 and NI-CAN for Windows 98/95
Figure 2-4. Device Manager Shows PXI-8461 That Is Not Working Properly
To configure a particular interface, double-click on that interface in the list
of installed interfaces below National Instruments CAN Interfaces.
The Resources tab provides information about the hardware resources
assigned to the CAN interface. Use the Resources tab to examine the
assigned resources to verify that there are no conflicts. The Conflicting
Device List lists any conflicts. If conflicts exist, uncheck the Use
automatic settings checkbox and use the Change Setting button to select
conflict-free resources for the CAN hardware.
The Settings tab, shown in Figure 2-5, provides information about the
NI-CAN software configuration for the CAN interface.
Figure 2-5. NI-CAN Hardware Settings Dialog Box