Filter
Top Products
Appendix C Cabling Requirements for PXI-8460 Low-Speed CAN
© National Instruments Corporation C-7 PXI-8461 or PXI-8460 and NI-CAN for Windows 98/95
Figure C-5. Location of Termination Resistors on a PXI-8460
2. Cut and bend the lead wires of the resistors you want to install. Refer
to Figure C-6.
Figure C-6. Preparing Lead Wires of Replacement Resistors
3. Insert the replacement resistors into the empty sockets.
4. Refer to Install the Hardware, in Chapter 2, Installation and
Configuration, to complete the hardware installation.
1 Port 1 Termination Resistors 2 Port 2 Termination Resistors
2
1
0.5 in
(13 mm)
0.165 in
(4 mm)