Filter
Top Products
Chapter 4 PCMCIA Serial Hardware Installation, Verification, and Configuration
Serial Hardware and Software for Windows 4-2 ni.com
8. Windows 2000 should automatically detect your hardware and display
the Found New Hardware Wizard. Complete the wizard by clicking
Next in each window and then Finish. When you complete the wizard,
continue to the Verify the Installation section.
If the Found New Hardware Wizard does not appear, refer to the
Forcing Windows to Detect Your Hardware section in Appendix D,
Troubleshooting and Common Questions.
Install the Hardware
To install the PCMCIA-232 or PCMCIA-485 in your computer, first start
Windows 2000. If the card is not already inserted, insert it into a free PC
Card (PCMCIA) socket the same way you insert a disk into a floppy drive.
The card has no jumpers or switches to set, and you do not need to shut
down the system before you insert it.
Windows 2000 should automatically detect your hardware and display the
Found New Hardware Wizard. Complete the wizard by clicking Next in
each window and then Finish.
If the Found New Hardware Wizard does not appear, refer to the Forcing
Windows to Detect Your Hardware sectioninAppendixD,
Troubleshooting and Common Questions.