Filter
Top Products
12
2. Installation
2-3. Connecting to the Image Input Terminals
This Switcher has two interface boards, MM-VIDEO and MM-RGB as standard equipment. See page 7. Connect required video signals.
Four interface boards can be inserted in the Switcher at the same time. See page 13.
BNC x 5 cable
(not supplied)
RCA(female)-to-BNC(male)
adapter (not supplied)
Component video RCA x 3 cable
(not supplied)
MM2000
PC
DVD player
COMPONENT
Ferrite clamp
core (supplied)
Mounting the ferrite clamp core
Use the supplied ferrite clamp core.
1
Open the accessory ferrite clamp core and attach it to the cable.
When doing so, attach this as close as possible to end that goes to the switcher.
* Push the catch to open the ferrite clamp core.
2
Close the ferrite clamp core tightly.
3
Fix the supplied band to the cable as a stopper.
* Pull the end of the band to tighten it. Cut off the surplus of the band.
Band