Filter
Top Products
15
2. Installation
2-6. Connecting the Supplied Power Cable
Connect the supplied power cable to the Switcher.
First connect the supplied power cable’s three-pin plug to the AC IN of the Switcher, and then connect the other plug of the
supplied power cable in the wall outlet.
Make sure that the
prongs are fully inserted
into both the AC IN and
the wall outlet
Ferrite clamp
core (supplied)
NOTE
• Always mount the ferrite clamp core to the power cable. The ferrite clamp core should be mounted as close
to this unit as possible.
• Do not unplug the power cable from the wall outlet or switcher when the switcher is powered on. Doing so
can cause damage to the AC IN connector of the switcher and (or) the prong plug of the power cable.
Carefully operate the unit when “Power ON” or “Please wait” is displayed on the LCD screen in particular.