NEC MT840 Projector User Manual


 
E–26
Using the PC Card Viewer function
NOTE:
When using the supplied software (CD-ROM)
The software is designed to use with a personal computer only. Do
not play the software on CD player. Doing so could cause damage to
speakers.
Features
The Viewer feature allows slides stored on a PC card to be displayed
on the projector. Even if no computer is available, presentations can
be conducted simply with the projector. This feature is convenient
for holding presentations at meetings and in offices, as well as for
playing images taken on digital cameras.
Easy to use
Presentations can be started immediately simply by inserting a
PC card (not supplied)
Easy slide switching
Remote control operation
Jumping to list of slides or any specific slide
High quality images
High resolution up to 1024ן768 dots(MT840: up to 800ן600
dots)
24-bit full color playback
Viewing of digital camera images
Simpl utility software (for computer)
PC Card Viewer software operable on Windows 95/NT
Slides can be created by capturing the currently displayed im-
age
Control screen for displaying lists of slides and editing
Automatic slide conversion of files created with Microsoft
PowerPoint 95 and 97
* Microsoft, Windows and PowerPoint are registered trademarks
of Microsoft Corporation.
Inserting and Ejecting the PC Card
The PC card is used to view presentation data prepared on the com-
puter and to capture and play images projected with the projector.
Eject button
Inserting the PC Card
Hold the PC card horizontally and insert it slowly into card slot
with its top facing up.
The eject button pops out once the PC card is fully inserted.
Check that the PC card is fully inserted.
NOTE: Do not try to force the PC card into the slot.
Ejecting the PC Card
Press the eject button. The PC card pops out a little. Grasp the edges
of the PC card and pull it out. Do not eject the PC card while its data
is being accessed.
Direction for Inserting the PC Card
The PC card has a top and bottom and must be inserted into the
PC card slot in a specific direction. It cannot be inserted back-
wards or upside-down. Attempting to force it into the slot in the
wrong direction may break the internal pin and damage the card
slot. Refer to the PC card's operating instructions for the proper
direction of insertion.
PC Card Type
The PC Card Access slot accepts PCMCIA Type II.