Filter
Top Products
115
7. Maintenance
To replace the lter (sponge):
CAUTION
• Replace both lters at the same time.
• Before replacing the lters, remove dust and dirt from the projector cabinet.
• The projector contains high-precision parts. Keep out dust and dirt during lter replacement.
• Do not wash the lter with water. Water will damage the lter membrane.
• Reattach the lter cover correctly. Failure to do so may cause projector malfunction.
Preparation: Replace the lamp before replacing the lters.
NOTE: When you replace the lamp, it is also wise to replace the fi lter. The fi lter comes in the same package with your replacement
lamp.
1. Remove the filter cover by pushing down on the catch of the cover until you feel it detach.
Catch
2. Gently peel off the filter (sponge) and replace it with the new one.
The filter is attached with self-adhesive tape. Peel off the release paper before use.
3. Reinstall the new filter cover.
• Slip the lter cover back until it snaps into place.
Front
Rear