Filter
Top Products
iTap GigaBit Dual Port Aggregator
8
Figure 4: 96547iTP Front Panel Features
Figure 5: Rear panel features
iTap Port Aggregator LEDs
Link Indicators: If a good link is established, the LED illuminates a steady green.
Activity Indicators: If there is current activity on this link, the LED fl ashes.
Utilization Alarms A and B: These LEDs illuminate red when the threshold
utilization level exceeds the set threshold level. The Utilization Alarm LEDs
remain illuminated until reset with the Reset button or remotely reset via Web
Manager or System Manager.
PWR 1/ PWR 2: Main and Redundant Power. If the iTap is deployed with both
power supplies, both LEDs illuminate when the iTap is connected to power. An off
power LED indicates that the corresponding power supply is not functioning or not
connected.
Management Port
for Remote Interfaces
RS232 Port for
Command Line
Interface
Redundant
Power Supplies
Management
Port
RS232
2x16 Character Display
Utilization
Alarms
Power
Status
B
12
A
www.netoptics.com
®
RESET
Network
Monitor
1
2
B
A
Dual Port Aggregator
GigaBit Copper
TM
LINKACT
LINKACT LINKACT
LINKACT
Reset
Button
Network
Ports
Monitor
Ports
Link
LED
Activity
LED