Filter
Top Products
iTap GigaBit Dual Port Aggregator
12
To set the current date and time:
1. Type set time <mm/dd/yyyy-hh:mm:ss> where mm is the month, dd is the day
of the month, yyyy is the year, hh is the hour, mm is minutes of the hour, and ss
is seconds. Press Enter. Time is based on the 24-hour clock.
To display current settings:
1. Type show set and press Enter. The CLI displays the current setting similar to
the example in Figure 7.
Figure 7: Show Set Command Example
To disable the display and remote interfaces:
1. Type show display to view the current setting. The default value is Display:
ON.
2. Type display and press Enter. Access to the tap from remote interfaces will be
blocked and the front panel will not display link utilization or peak information.
3. Type display and press Enter again to restore the display and remote intefaces.