Filter
Top Products
iTap GigaBit Dual Port Aggregator
13
To use the Help command:
1. Type Help at the NetOptics prompt. The list of help topics is displayed.
Figure 8: iTap CLI Help Menu
5. To view the syntax for changing the iTap’s confi guration parameters, type help
set and press Enter.
6. Repeat with the variable of interest to view the syntax for all commands avail-
able from the CLI. For more information on CLI commands, see Appendix B.
Mounting the iTap
The iTap is designed for rack mounting in a two-slot, 19-inch panel. The mounting
panel occupies one rack unit.
To rack mount the iTap:
1. Attach the two-slot panel to your rack using the attached thumbscrews.
2. Slide the iTap into one of the slots and secure with the attached thumbscrews.
3. Make sure that the rack is properly grounded.
The iTap can also be placed on a surface using the pads supplied with the iTap.