Filter
Top Products
iTap GigaBit Copper Port Aggregator
23
Viewing System Status
You can view status information of the iTap and ports. System Status indicates if
the iTap is functioning correctly. If the System Status is DOWN, there is an inter-
nal error. For more information, contact Net Optics' Technical Support.
In addition to the System Status, you can view the status of each iTap port and
power supply as shown in Figure 16.
Figure 16: iTap System, Link, and Power Status
The following table explains the status fi elds.
Field Name Value Description
System Status UP/DOWN Down indicates an internal error. Call Net Optics
Customer Service for assistance
Port A Link Status UP/DOWN Indicates the state of incoming traffi c on Port A
Port B Link Status UP/DOWN Indicates the state of incoming traffi c on Port B
Port 1 Link Status UP/DOWN Indicates the state of communication on Port 1
Port 2 Link Status UP/DOWN Indicates the state of communication on Port 2
Power Supply 1
Status
ON/OFF Indicates if the iTap is receiving power from
Power Supply 1
Power Supply 2
Status
ON/OFF Indicates if the iTap is receiving power from
Power Supply 2
If a link is down, check the Port Parameters in the confi guration section and submit
correct settings if needed. If the link is still down, verify the communication
settings of the connected devices are correct and check the cables.