Net Optics none Network Router User Manual


  Open as PDF
of 57
 
27
*** Condential - DO NOT Distribute ***
Director
Network Port 1
Network Port 2
Monitor Port 3
+
lter add in_ports=n1.1,n1.2 action=redir redir_ports=m.3
Trafc aggregationFigure 23:
Regenerate Trafc to Any Set of Monitor Ports
Director can be used like a Regeneration Tap, copying trafc from a Network port (or aggregated group of Network
ports) to multiple Monitor ports. The lteraddcommand is used to do this. The only difference from using the command
to connect a single or multiple Network ports to a single Monitor port is that a list of Monitor ports is specied.
ToregeneratetrafcfromNetworkPort1toMonitorPorts3,4,and5:
Enter 1. lteraddin_ports=n1.1action=redirredir_ports=m.3-m.5. The regeneration connection is pending.
Enter 2. ltercommit. The regeneration connection is activated.
Network Port 1
Monitor Port 3
Monitor Port 4
Monitor Port 5
lter add in_ports=n1.1 action=redir redir_ports=m.3-m.5
Trafc regenerationFigure 24:
ToaggregatetrafcfromNetworkPort10andNetworkPort11andregeneratetheresultingstreamtoMonitor
Ports 9 and 10:
Enter 1. lteraddin_ports=n1.10,n1.11action=redirredir_ports=m.9,m.10. The aggregation/regeneration
connection is pending.
Enter 2. ltercommit. The aggregation/regeneration connection is activated.
+
Monitor Port 9
Monitor Port 10
lter add in_ports=n1.10,n1.11 action=redir redir_ports=m.9,m.10
Network Port 10
Network Port 11
Combined aggregation and regenerationFigure 25:
 previous next