Net Optics none Network Router User Manual


  Open as PDF
of 57
 
30
*** Condential - DO NOT Distribute ***
Director
Monitor Port 1
Network Port 5
lter add in_ports=n1.5 ip_proto=6 action=redir redir_ports=m.1
lter add in_ports=n1.5 ip_proto=17 action=redir redir_ports=m.1
Protocol =
TCP
Protocol =
UDP
+
Logical OR lter connectionFigure 29:
View lters
To view a list of all pending lters, enter lterlist. To view the active lters, enter lterrunning.
Net Optics> lter list
001 ip_src=00000000/ffffffff,ip_dst=00000000/ffffffff,ip_proto=0000
l4_src_port=0080,l4_dst_port=0000,vlan=0000,action=3
in_ports=01
redir_ports=13
002 ip_src=0a010101/ffffffff,ip_dst=00000000/ffffffff,ip_proto=0000
l4_src_port=0000,l4_dst_port=0000,vlan=0000,action=1
in_ports=00 05
003 ip_src=00000000/ffffffff,ip_dst=00000000/ffffffff,ip_proto=0000
l4_src_port=0000,l4_dst_port=0025,vlan=0000,action=3
in_ports=00
redir_ports=12
Net Optics>
Filter list commandFigure 30:
Tip! ___________________________________________________________________________________________________
The ID numbers shown at the left of each lter in the lterlist are the IDs that apply for lterdelid=<id> and
lterincid=<id> commands, because all three commands act on the pending lter lsit. Do not use the IDs in a
lterrunninglist as the reference for lterdel or lterins commands.
________________________________________________________________________________________________________
 previous next