45
*** Condential - DO NOT Distribute ***
Director
Command Sub-Command Parameters Example and description
passwd passwd
Interactively changes the password of the SSH user
account
ping <address>* ping 10.1.1.4
Parameters:
<address> is an IP address
Pings the specied IP address to check for connectivity
port set ports=<portlist>*
autoneg=< on | off >
duplex=< full | half >
speed=< 10 | 100 | 1000 >
port set n1.1-n1.3 autoneg=on duplex=full
Parameters:
<portllist> is a portlist
For other parameters, select a value from the
listed choices
For 10/100/100 Copper interface Network and Moni-
tor ports, enables or disables autonegotiation; selects
the duplex mode; and sets the xed speed (10Mbps,
100Mbps, or 1000Mbps) if autonegotiation is off
show port show
Displays the current port status and settings
quit quit
Exits the CLI shell (same as exit and logout)
restart restart
Reboots the Director device; also called warm boot;
similar to power-cycling the device; does not change
the conguration parameters or lters
save save my_conguration-1
Parameters:
<lename> is the name of the le where the
conguration is saved; a string; do not include an
extension
Saves the Director device conguration to a le;
saved information includes port set-up and lters
show <lename>* show my_conguration-1
Parameters:
<lename> is the name of the le to display; a
string; do not include an extension
Displays the contents of the specied saved
conguration le (see save command)
stats clear ports=all|<[portlist> stats clear ports=all
Clears RMON statistics for the designated ports
show ports=all|<[portlist> stats show ports=m.2,n1.4
Displays RMON statistics for the designated ports