N3G005W 3G Wireless Router User Guide YML894 Rev3
34 www.netcomm.com.au
Basic Setting > Wireless
This page allows you to configure the wireless feature of the unit such as SSID and security.
1. Wireless - Enable by default. Changing this option to Disable will turn off the wireless feature on the unit
and you will not be able to connect wirelessly.
2. WMM Capable- Choose Enable or Disable WMM function. WMM stands for Wi-Fi Multimedia, this provides
features that improve the user experience for audio, video and voice applications over Wi-Fi networks.
3. SSID- Service Set Identifier (SSID) is the name designated for the wireless network of the unit. The default
SSID is netcomm n3g series. This SSID can be easily changed to rename the wireless network. (Note:
SSID names may contain up to 32 ASCII characters)
4. Channel- can be from 1 to 13 or “Auto”, where Auto will select the best available channel. The default
setting is Auto.Devices on the network that want to connect to the unit must use the same channel. (Note:
Most wireless adapters will automatically scan and match the wireless channel). Changing this option
might improve the wireless signal quality. However, please only use channel 1 to 11 as certain wireless
adapter does not work on channel 12 and 13.
5. Auto Select Channel – Choose Enable to let the router decides the best channel to use. Disable to
choose manually.
6. Security- You may choose from the following option, No Encryption, WEP.802.1x, WPA-PSK, WPA, WPA2-
PSK, or WPA2. By default the N3G005W uses 64Bit WEP Encryption. Other option that you can use are
explained as follow: