Filter
Top Products
YML894 Rev3 N3G005W 3G Wireless Router User GuideN3G005W 3G Wireless Router User Guide
www.netcomm.com.au 49
N3G005W
Security Setting > Miscellaneous
This page allows you to change various miscellaneous security settings on the unit.
These settings are:
1. Remote Administrator IPAdress/Host/Port. By default, only users on the LAN side can browse the unit web
configuration page to perform administration task. Enabling this feature will allow you to connect to the
web configuration from the internet. If the specified Host address is 0.0.0.0, any computer on the internet
can connect to the unit web configuration page. For better security, you can specify just one IP address
or even use subnet mask bits “/nn” notation to specified a group of trusted IP addresses for example,
“10.1.2.0/24”.
Note: When Remote Administration is enabled, the web server port will be shifted to 80. However, you can also change web server port.
2. Administrator Time-out. The amount of time with no activity before the unit logout automatically, you may
set it to zero to disable this feature.
3. Discard PING from WAN side. When enabled, any host on the WAN port can not ping the unit.
4. Disable UPNP: When enable, the UPnP feature will be disabled. Some users will want to disable UPnP for
security reasons.
Click Save to save the settings and Undo to cancel.