Filter
Top Products
V110, V210P, V211, V220 User Guide YML881Rev1
16 www.netcomm.com.au
DHCP Mode
1. Click on WAN on the left menu.
2. Change the IP Type to DHCP.
3. After that, click the Submit button.
Option Description
DNS Server 1
The Domain Name Service that the NetComm ATA uses to resolve domain names to IP
addresses. This is usually your modem / Router or the primary DNS server specified by
your Internet Service Provider (ISP). (Optional)
DNS Server 2
The Domain Name Service that the NetComm ATA uses to resolve domain names to
IP addresses. This is usually your modem / router. DNS 2 can be a different address to
DNS 1 to provide a backup DNS server if DNS 1 fails. (Optional)
MAC
The Ethernet MAC address of the WAN interface. (Optional)
Host Name
The host name of the VoIP Gateway. (Optional)
4. Click on Save Settings/Reboot on the left menu and then click the Save & Reboot button to save
your settings.
5. The NetComm ATA will reboot automatically to make your changes effective. Please wait while it reboots.