Filter
Top Products
YML881Rev1 V110,V210P,V211,V220V110, V210P, V211, V220 User Guide
www.netcomm.com.au 19
Field Description
Active
If set to on, the NetComm ATA will attempt to register with your VoIP service provider
using this account.
SIP Proxy Domain
The SIP Proxy Domain is specified by your VSP.
Proxy Server
The host name of IP address of the SIP server. The proxy server is responsible for
forwarding requests received from the NetComm ATA to your VoIP service provider. The
Proxy Server is specified by your VoIP service provider.
Outbound Proxy
The host name of IP address of the Outbound Proxy server. The Outbound proxy server
is responsible for forwarding requests received from the NetComm ATA to your VoIP
service provider. The Proxy Server is specified by your VoIP service provider.
Display Name
The name or number the called party sees when you call them.
User Name
Your VoIP number. This number is assigned by your VoIP service provider.
Auth. Name
The authentication username assigned by your VoIP service provider. This can be
different to your VoIP number.
Auth. Password
The authentication password provided by your VoIP service provider.
Status
Indicates if the NetComm ATA is registered to your VSP. If “Registered” is shown, you
can make and receive calls via your VoIP service provider. If the NetComm ATA reports
“not registered”, check the SIP Service Provider settings above and try again.
SIP Expiry Time
This setting specifies a recommendation to the SIP server on the re-registration interval.
Increasing this time will send less registration traffic, but can cause other issues.
4. Click on Save Settings/Reboot on the left menu and then click the Save & Reboot button to save
your settings.
5. The NetComm ATA will reboot automatically to make your changes effective. Please wait while it reboots.
6. Once the device has rebooted, check if the SIP LED is illuminated to indicate successful registration with
your VoIP Service Provider. If not, please check your settings.