Filter
Top Products
V110, V210P, V211, V220 User Guide YML881Rev1
52 www.netcomm.com.au
Add Virtual Server
Num
Enter the number corresponding to the Virtual Server configuration.
Server IP
Enter the private network IP address for the particular server.
Protocol
Select TCP or UDP.
Internal Port
Enter the port number of the Private Network (LAN or internal network). In most cases,
the private port number is same as public port number. This port number cannot be
seen from the WAN side.
External Port
Enter the port number of the Public Network (WAN or external network).
Add Server [Button]
Add the new Server which you configured
Reset [Button]
Reset configured items
Example 1 (FTP Server):
Num: 0, Server IP: 10.0.0.150, Protocol: TCP, Internal Port: 21, External Port: 21
Other people can visit your FTP Server by entering the WAN IP Address of the ATA and then the NetComm ATA
will re-directly it to your LAN IP 10.0.0.150.