Filter
Top Products
V110, V210P, V211, V220 User Guide YML881Rev1
42 www.netcomm.com.au
Auto Dial Time function
This value determines the time the ATA waits after the last digit is entered, before placing the call.
Alternatively, you can press # to immediately dial the number.
Flash Time Settings function
When you use the PSTN phone and you need to press the Hook to simulate Flash key (Switch to the other
phone line or HOLD), this function is to set the amount of time you need to press the Hook to represent the
Flash function.
Call Waiting Setting
You can enable/disable the call waiting setting in this page.
When a new incoming call arrives while you are on an existing call, you can push the Flash button to switch to
the new call. You can then use the Flash button to switch between the two calls.
To end the first call, hang up the phone. The phone will now ring, pick it up to talk to the second caller. To end
this call, simply hang up.
T.38 (FAX) Setting
You can enable/disable the T.38 FAX function in this page.
Options Description
T.38 (FAX)
Switch on to enable T.38 fax support.
T.38 Port
Default is 60000.