Filter
Top Products
NETGEAR 7000 Series Managed Switch Administration Guide
16-2 Simple Network Time Protocol (SNTP)
v1.1, May 2006
Example #2: show sntp client
Example #3: show sntp server
Example #4: Configure SNTP
Netgear switches do not have a built-in real-time clock. However, it is possible to use SNTP to get
the time from a public SNTP/NTP server over the Internet. You may need permission from those
public time servers. The following steps configure SNTP on the switch:
(Netgear Switch Routing) #show sntp client
Client Supported Modes: unicast broadcast
SNTP Version: 4
Port: 123
Client Mode: unicast
Unicast Poll Interval: 6
Poll Timeout (seconds): 5
Poll Retry: 1
(Netgear Switch Routing) #show sntp server
Server IP Address: 81.169.155.234
Server Type: ipv4
Server Stratum: 3
Server Reference Id: NTP Srv: 212.186.110.32
Server Mode: Server
Server Maximum Entries: 3
Server Current Entries: 1
SNTP Servers
------------
IP Address: 81.169.155.234
Address Type: IPV4
Priority: 1
Version: 4
Port: 123
Last Update Time: MAY 18 04:59:13 2005
Last Attempt Time: MAY 18 11:59:33 2005
Last Update Status: Other
Total Unicast Requests: 1111
Failed Unicast Requests: 361