NETGEAR 7000 Series Managed Switch Administration Guide
10-2 IGMP Snooping
v1.1, May 2006
Example #2: show igmpsnooping
Example #3: show mac-address-table igmpsnooping
(Netgear Switch) #show igmpsnooping?
<cr> Press Enter to execute the command.
<slot/port> Enter interface in slot/port format.
mrouter Display IGMP Snooping Multicast Router information.
<1-4093> Display IGMP Snooping valid VLAN ID information.
(Netgear Switch) #show igmpsnooping
Admin Mode............................... Enable
Multicast Control Frame Count............ 0
Interfaces Enabled for IGMP Snooping..... 1/0/10
Vlans enabled for IGMP snooping.......... 20
(Netgear Switch) #show mac-address-table igmpsnooping ?
<cr> Press Enter to execute the command.
(Netgear Switch) #show mac-address-table igmpsnooping
Type Description Interfaces
----------------------- ------- -------------- -----------
00:01:01:00:5E:00:01:16 Dynamic Network Assist Fwd: 1/0/47
00:01:01:00:5E:00:01:18 Dynamic Network Assist Fwd: 1/0/47
00:01:01:00:5E:37:96:D0 Dynamic Network Assist Fwd: 1/0/47
00:01:01:00:5E:7F:FF:FA Dynamic Network Assist Fwd: 1/0/47
00:01:01:00:5E:7F:FF:FE Dynamic Network Assist Fwd: 1/0/47