Filter
Top Products
Advanced Settings
40
AirCard 779S Mobile Hotspot
To install drivers on devices running operating systems other than Windows XP:
1. Ensure that the hotspot is powered off.
2. Connect the hotspot to your computer using the USB cable.
The hotspot automatically powers on and installs the necessary driver.
You can visit the hotspot web page at http://attwifimanager or http://192.168.1.1 to
customize your hotspot’s advanced settings.
To install drivers on a computer running Windows XP:
1. On the hotspot, press the Power button for five seconds.
2. Press the Power button until Install Win XP drivers is highlighted.
3. Press the Power button.
4. Follow the instructions to enable device driver installation mode.
5. Connect the hotspot to your computer using the USB cable.
The hotspot installs the necessary driver.
After the driver is installed, you can visit the hotspot web page at http://attwifimanager or
http://192.168.1.1 to customize your hotspot’s advanced settings.
Back Up and Restore Hotspot Settings
You can back up and restore hotspot settings. Backing up and restoring is useful if you use
more than one hotspot and you want the same settings on all of your hotspots. You can also
save your settings before resetting to factory defaults or changing the settings.
To back up hotspot settings:
1. Launch a web browser from a computer or wireless device that is connected to the
network.
2. Enter http://attwifimanager or http://192.168.1.1.
A login screen displays.
3. Enter the password in the Sign In field.
The default password is attadmin. The password is case-sensitive.