Filter
Top Products
NETGEAR genie ADVANCED Home
53
N750 Wireless Dual Band Gigabit ADSL Modem Router DGND4000
LAN Setup
The LAN Setup screen allows configuration of LAN IP services such as Dynamic Host
Configuration Protocol (DHCP) and Routing Information Protocol (RIP).
The wireless modem router is shipped preconfig
ured to
use private IP addresses on the LAN
side and to act as a DHCP server. The wireless modem router’s default LAN IP configuration
is:
• L
AN IP address. 192.168.0.1
• Subnet mask. 255
.255.255.0
These addresses are part of the designated private
address range for use in private networks
and should be suitable for most applications. If your network requires a different IP
addressing scheme, make those changes in the LAN Setup screen.
To change the LAN settings:
Note: If you change the LAN IP address of the wireless modem router
while connected through the browser, you are disconnected. You
have to open a new connection to the new IP address and log in
again.
1. Select ADVANCED > Setup > LAN Setup to display the following screen:
2. Enter the settings that you want to customize. These settings are described in the following
section, LAN Setup Screen Settings.
3. Click Appl
y to save your changes.