Filter
Top Products
USB Storage
67
N750 Wireless Dual Band Gigabit ADSL Modem Router DGND4000
USB Storage Advanced Settings
You can set up the device name, workgroups, and network folders for your USB device. On
the Advanced tab, select USB Storage > Advanced Settings to display the following
screen:
You can use this screen to specify access to the USB storage device.
• Network Device
Name. The default is readyshare. This name is used to access the USB
device connected to the wireless modem router.
• Workgroup. If you are using a Windows workgroup rathe
r than a domain, the workgroup
name is displayed here. The name works only in an operating system that supports
NetBIOS, such as Microsoft Windows.
• Acc
ess Method.
The access methods are described here.
- Network Connection. Enab
led by default, this connection allows all users on the
LAN to have access to the USB drive.
- HTTP. Enabled b
y default. You can type http://readyshare.routerlogin.net/shares
to access the USB drive.
- HTTP (via internet). Disabled by defau
lt. If you enable this setting, remote users can
type http://<public IP address>/shares (for example, http://1.1.10.102/shares) or a
URL domain name to access the USB drive over the Internet. This setting supports
file uploading only.
- FTP. Disabled by defa
ult.
- FTP (via internet). Disabled
by default. If you enable this setting, remote users can
access the USB drive through FTP over the Internet. This setting supports both
downloading and uploading of files.