Filter
Top Products
Push 2 TV Adapter (PTV1000)/Intel Wireless Display User Manual
2-9
v1.0, January 2010
How do I Change the Adapter Display Language
To change the adapter display language, use the recessed button (7) while the adapter is on the
ready screen shown.
• A short press (less than half a second) will step forward through the languages.
• A long press (more than half but less than one and a half seconds) will step backward through
the languages.
Warning: Pressing the button for more than 5 seconds will clear the security profiles
saved in the adapter, which will require you to repeat the first-time connection
procedure.
The language change will immediately be reflected on your TV screen.
How do I Update the Firmware?
If the firmware needs updating, there will be an Update available button on the Adapter
Properties page. (The Properties button is only available if you are currently connected to an
adapter.) Click the Update available button to begin the update process. Once the update begins
the TV screen will read Updating adapter. Please wait. After the procedure is complete, the
adapter automatically disconnects from the laptop. Scan again to connect to the adapter.
How do I Reset the Application Settings?
Resetting reverts the application back to its out-of-the-box state. To reset, click Help and select
About. Click Reset Settings. To proceed with the reset, click the Yes button on the Reset Intel
Wireless Display settings page.
After starting Intel Wireless Display, all detected adapters will be displayed as not previously
connected. However, it will not be necessary to enter a security code since the security settings are
stored in the adapter.
How do I Reset the Adapter?
If the adapter is not responding correctly, and resetting the application has not helped, try restarting
the adapter. Push the power button once to turn the adapter off, and push it again to turn it on. After
the To get started screen appears on the TV, rescan before trying to connect.