Filter
Top Products
Push 2 TV Adapter (PTV1000)/Intel Wireless Display User Manual
2-14
v1.0, January 2010
1. If the auto-connect adapter is discovered after initial launch, a connection attempt will be
made
2. If the auto-connect adapter is already in the list when the application is relaunched including
pressing the bezel button, a connection attempt will be made. In this case, if a connection is
made it will typically be faster than in case 1, because the application is already running and a
new scan is not performed.
There are two ways to select the auto-connect adapter.
1. On the Adapter properties page, there is an Automatically connect to this adapter check
box. If this check box is selected, this adapter will be chosen as the auto-connect adapter. Note
that any other adapter that was previously selected for auto-connect will no longer have its
auto-connect property set.
2. In the Detected adapters list on the Intel Wireless Display home screen, right clicking on an
adapter that has previously been connected shows an Auto-connect property in the context
menu (popup menu). A check indicates if this adapter is currently set as the auto-connect
adapter or not. Selecting that menu item will change the auto-connect state of the adapter.