NETGEAR R7000 Network Router User Manual


 
Manage Your Network
134
Nighthawk AC1900 Smart WiFi Router Model R7000
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADVANCED > Administration > Backup Settings.
5. Click the Browse button to find and select the cfg file.
6. Click the Restore button.
The file is uploaded to the router and the router reboots.
WARNING:
Do not interrupt the reboot process.
Erase the Current Configuration Settings
You can erase the current configuration and restore the factory default settings. You might
want to do this if you move the router to a different network. (See
Factory Settings on
page 165).
To erase the configuration settings:
1. Launch an Internet browser from a computer or wireless device that is connected to the
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADVANCED > Administration > Backup Settings.
5. Click the Erase button.
The factory default settings are restored. The user name is admin, the password is
password, and the LAN IP address is 192.168.1.1. DHCP is enabled.
Remote Management
The remote management feature lets you access your router over the Internet to view or
change its settings. You need to know the router’s WAN IP address to use this feature. For
information about remote access using Dynamic DNS, see
Chapter 7, Access the Router’s
USB Drive Through the Internet.