Filter
Top Products
Control Access to the Internet
56
Nighthawk AC1900 Smart WiFi Router Model R7000
Block Services from the Internet
You can block Internet services on your network based on the type of service. You can block
the services all the time or based on a schedule.
To block services:
1. Launch an Internet browser from a computer or wireless device that is connected to the
network.
2. T
ype http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the router user name and password.
The user name is admin.
The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4. Select
ADVANCED > Security > Block Services.
5. Specify when to block the services:
• To block the services all the time, select the Always radio button.
• T
o block the services based on a schedule, select the Per Schedule radio button.
To specify the schedule, see Schedule When to Block Internet Sites and Services on
page 57.
6. Click the Add button.
The Block Services Setup screen displays:
7. To add a service that is in the Service Type list, select the application or service.
The settings for this service automatically display in the fields.
8. T
o add a service or application that is not the list, select User Defined.
a. If you know that the application uses either
TCP or UDP, select the appropriate
protocol; otherwise, select TCP/UDP (both).
b. Enter the starting port and ending port numbers.
• If the service uses a single port number
, enter that number in both fields.