Filter
Top Products
NETGEAR ReadyNAS User Guide
Maintenance and Administration 3-11
v1.0, October 2007
Removing the System Module from the ReadyNAS 1100
To access the system module and remove it from the ReadyNAS1100:
1. Power off the unit and remove the screws.
2. Lift up the latch.
3. Pull the system module forward; it slides out easily.
The illustration on the right shows the ReadyNAS1100 with the system module removed.
Changing User Passwords
There are two ways in which user passwords can be changed in the User security mode. The first
way is for the administrator to change the passwords by selecting Security > User & Group
Accounts and then selecting Manage Users from the pull-down menu. The other and preferred
way is to allow users to change their own passwords. This relieves the administrator from this task
and encourages users to change their passwords on a more regular basis for enhanced security.
Users can use the Web browser and their existing password to log in to https://<ip_addr>/ to
access the Web share listing page. Then select the Password tab, and follow the prompts to set a
new password
.
Figure 3-12
Figure 3-13