Filter
Top Products
NETGEAR ReadyNAS User Guide
Configuring Your ReadyNAS 1-61
v1.0, October 2007
If you wish to continue, click Perform System Update. After the update image has been
downloaded, you will be asked to reboot the system. The update process updates only the firmware
image and does not modify your data volume. However, it is always a good idea to back up your
important data whenever you perform an update.
Local Update
When the ReadyNAS device is not connected to the Internet, or Internet access is blocked, you can
download an update file from the Support site and upload that file to the ReadyNAS by selecting
the Local update tab. The update file can be a RAIDiator firmware image or an add-on package.
Click Browse to select the update file and then click Upload and verify image. The process takes
several minutes after which you are requested to reboot the system and proceed with the upgrade.
Figure 1-66
Figure 1-67
Warning: Do not click the browser Refresh button during the update process.