Filter
Top Products
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG102
Basic Installation and Configuration 3-27
v1.0, September 2005
How to Configure WPA and/or WPA2 with Radius
To configure WPA, follow these steps:
1. Log in at the default LAN address of http://192.168.0.232 with the default user name of
admin and default password of password, or using whatever LAN address and password you
have set up.
2. From the Security menu, click Radius Server Settings link to display the Radius Server
Settings menu shown below.
Note: Not all wireless adapters support WPA. Furthermore, client software is required on
the client. Windows XP and Windows 2000 with Service Pack 3 or above do
include the client software that supports WPA. Nevertheless, the wireless adapter
hardware and driver must also support WPA. Consult the product document for
your wireless adapter and WPA client software for instructions on configuring
WPA settings.
Figure 3-13