Filter
Top Products
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG102
Management 4-7
v1.0, September 2005
Viewing a List of Attached Devices
The Available Wireless Station List contains a table of all IP devices associated with the wireless
access point in the wireless network defined by the Wireless Network Name (SSID).
1. From the main menu of the browser interface, under the Information heading, click the
Available Wireless Station List link to view the list, shown below.
For each device, the table shows the Station ID, MAC address, IP Address, and Status
(whether the device is allowed to communicate with the wireless access point or not).
If the wireless access point is rebooted, the table data is lost until the wireless access point
rediscovers the devices.
2. To force the wireless access point to look for associated devices, click the Refresh button.
Wireless 11b/g Received/Transmitted
Unicast Packets The Unicast packets sent since the WAG102 was restarted.
Broadcast Packets The Broadcast packets sent since the WAG102 was restarted.
Multicast Packets The Multicast packets sent since the WAG102 was restarted.
Total Packets The Wireless packets sent since the WAG102 was restarted.
Total Bytes The Wireless bytes sent since the WAG102 was restarted.
Refresh button Click the Refresh button to update the statistics on this screen.
Figure 4-5
Note: A wireless network can include multiple wireless access points, all using the same
network name (SSID). This enables extending the reach of the wireless network
and allows users to roam from one access point to another, providing seamless
network connectivity. Under these circumstances, be aware that only the stations
associated with this access point will be presented in the Available Station List.
Table 4-1. Statistics Fields (continued)
Field Description