Filter
Top Products
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG102
3-30 Basic Installation and Configuration
v1.0, September 2005
How to Configure WPA-PSK and/or WPA2-PSK
To configure WPA-PSK, follow these steps:
1. Log in at the default LAN address of http://192.168.0.232 with the default user name of
admin and default password of password, or using whatever LAN address and password you
have set up.
2. Click the WEP/WPA Settings link in the main menu of the WAG102.
3. Choose WPA-PSK, WPA2-PSK, or WPA-PSK and WPA2-PSK from the list.
4. Enter the pre-shared key passphrase.
Note: Not all wireless adapters support WPA. Furthermore, client software is required on
the client. Windows XP and Windows 2000 with Service Pack 3 or above do
include the client software that supports WPA. Nevertheless, the wireless adapter
hardware and driver must also support WPA. Consult the product document for
your wireless adapter and WPA client software for instructions on configuring
WPA settings.
Figure 3-15
WEP/WPA Settings 11a menu WEP/WPA Settings 11b/g menu