Filter
Top Products
Reference Manual for the NETGEAR 54 Mbps Wireless Access Point WG602v3
2-4 Introduction
202-10060-02, February 2005
System Requirements
Before installing the WG602v3, make sure your network meets these requirements:
• A hub, switch, or Cable/DSL router with an available 10/100 Mbps Ethernet port
• A Category 5 UTP straight through Ethernet cable with RJ-45 connector included in the
package, or one like it
• A 100-240 V, 50-60 HZ AC power source
• A Web browser for configuration such as Microsoft Internet Explorer 5.0 or above, or
Netscape Navigator 4.78 or above
• At least one Pentium class computer (or equivalent) with the TCP/IP protocol installed
• Other 802.11b or 802.11g-compliant devices
What’s In the Box?
The product package should contain the following items:
• NETGEAR WG602v3 54 Mbps Wireless Access Point
• Power adapter and cord (12Vdc, 1.2A)
• Straight through Category 5 Ethernet cable—10 feet (3.04 m)
• Printed WG602v3 54 Mbps Wireless Access Point Installation Guide
• Resource CD for the NETGEAR 54 Mbps Wireless Access Point WG602v3
– Reference Manual for the NETGEAR 54 Mbps Wireless Access Point WG602v3
(202-10060-02)—this manual
– Windows TCP/IP and Networking Tutorials
– Animated Install Assistant
– Soft copy of the WG602v3 54 Mbps Wireless Access Point Installation Guide
• Support Information card
• Warranty and Registration card
Contact your reseller or customer support in your area if there are any wrong, missing, or damaged
parts. You can refer to the Support Information Card for the telephone number of customer support
in your area. You should keep the Support Information card, along with the original packing
materials, and use the packing materials to repack the WG602v3 if you need to return it for repair.