Filter
Top Products
Advanced Settings
107
N300 Wireless Router WNR2000v4
To set up remote management:
1. Select Advanced >
Advanced Setup > Remote Management.
2. Select the Turn Remote Management On check box.
3. Under
Allow Remote Access By, specify the external IP addresses to be allowed to access
the router’s remote management.
Note: For enhanced security, restrict access to as few external IP addresses
as practical.
• T
o allow access from a single IP address on the Internet, select the Only This
Computer radio button. Enter the IP address that is allowed access.
• T
o allow access from a range of IP addresses on the Internet, select the IP Address
Range radio button. Enter a beginning and ending IP address to define the allowed
range.
• T
o allow access from any IP address on the Internet, select the Everyone radio
button.
4. Specify the port number for accessing the router user interface.
Normal web browser access uses the standard HTTP service port 80. For greater
security
, enter a custom port number for the remote router user interface. Choose a
number between 1024 and 65535, but do not use the number of any common service
port. The default is 8080, which is a common alternate for HTTP.
5. Click the Apply button.