Filter
Top Products
Supplemental Information
140
N300 Wireless Router WNR2000v4
Factory Settings
You can return the router to its factory settings. Use the end of a paper clip or some other
similar object to press and hold the Restore Factory Settings
button on the back panel of
the router for at least 7 seconds. The router resets, and returns to the factory settings.
Your
device returns to the factory configuration settings that are shown in the following table.
Table 4. WNR2000v4 router factory default settings
Feature Default behavior
Router login User login URL www.routerlogin.com or www.routerlogin.net
User name (case-sensitive) admin
Login password (case-sensitive) password
Internet
connection
WAN MAC address Use default hardware address
WAN MTU size 1500
Port speed Autosensing
Local area
network (LAN)
LAN IP 192.168.1.1
Subnet mask 255.255.255.0
DHCP server Enabled
DHCP range 192.168.1.2 to 192.168.1.254
Time zone United States is Pacific time; otherwise, varies by region
Time zone daylight saving time Disabled
Wireless Wireless communication Enabled
SSID name
Preset. For information, see the router label. (For a
description of the router label, see Label on page 12.)
Network key (password)
Broadcast SSID Enabled
Transmission speed Auto
Note: The maximum wireless signal rate derived from
IEEE Standard 802.11 specifications. Actual throughput
varies. Network conditions and environmental factors,
including volume of network traffic, building materials and
construction, and network overhead, lower actual data
throughput rate.
Country/region United States in the US; otherwise varies by region
RF channel Auto
Operating mode Up to 150 Mbps