NETGEAR WNR2000-100FSS Network Router User Manual


 
Advanced Settings
110
N300 Wireless Router WNR2000v4
The IPv6 screen displays:
2. Select the IPv6 connection type from the list. Your Internet service provider (ISP) can
provide this information.
If your ISP did not provide details, you can select 6to4 T
unnel.
If you are not sure what type of IPv6 connection the router uses, select Auto Detect
so that the router detects the IPv6 type that is in use.
If your Internet connection does not use PPPoE, DHCP
, a fixed IP address, or
pass-through but is IPv6, select Auto Config.
Note: For IPv6 address requirements and detailed information about IPv6
Internet connection types, see the following sections.
3. Click the Apply button.
Requirements for Entering IPv6 Addresses
IPv6 addresses are denoted by eight groups of hexadecimal quartets that are separated by
colons. Any four-digit group of zeroes within an IPv6 address can be reduced to a single zero
or altogether omitted.
The following errors invalidate an IPv6 address:
More than eight groups of hexadecimal quartets