Filter
Top Products
User Guide
User Guide 7-33
7.3 VOIP ATA Login Account Configuration
The VOIP ATA Login Account Configuration page allows the user to set and configure login
accounts for the service provider chosen in the index webpage, i.e., for the currently selected service
provider in the main webpage.
Figure 7-3 VOIP ATA Login Account Configuration
User Profile List:
This selection is a drop-down box, which allows the user to select the login account for which
the configuration needs to be done. When a login account is selected from this dynamic list, the
respective parameters are automatically displayed. A DEFAULT set of parameters is provided
for every new login added. This can be edited accordingly. New logins can be defined and
added manually by the user. An existing login account can also be edited or even deleted.
New User Profile:
New User Name is a text-field where the user can enter the name of the new login account to be
added, or a new string to rename an existing login account. The login account edited will be the
one chosen from the Service Provider List field.
Auth User ID:
This parameters is for authentication with the registrar. If not specified explicitly by ITSP, this
is the same as the User Name.
User Name:
This parameter holds the registration ID of the user with the registrar.
Password:
This parameter holds the Password used for authentication with the registrar.
Display Name:
This parameter holds the Display Name, as it should appear on the Caller-Id.