Netopia Network Adapater Network Card User Manual


 
User Guide
User Guide 8-53
Figure 8-6: Uploading .DLF file
3) Refering to Figure 8-6 , click Browse, search for the correct .DLF file and click Upload to
begin Firmware Update.
4) Click Cancel Update if you want to abort Firmware Update.
Warning!
As the uploading process will take about 1minutes, please do not turn off the VOIP
ATA.
5) Firmware Updating is successful if GUI as shown in Figure 8-7 is displayed.
Figure 8-7: Firmware Update Successful
6) As by default the VOIP ATA is set to Static IP, please refer to 4.1.1 on How to Access the GUI.