Netopia Network Adapater Network Card User Manual


 
User Guide
User Guide 7-42
7.6 Misc Configuration
The Misc Configuration pages configures system-level parameters. This has three sections: SIP
Device, STUN Parameters and Codec Preference.
Figure 7-6 VOIP ATA Misc Configuration
SIP Device:
This section configures the following infomartion:
Local SIP Port: Enter the local SIP Port number on which VOIP ATA should listen for
the messages. The range is 1 to 65535. (Default port is 5060)
Media Base Port: Enter the Media Base Port (also known as RTP port) number. This
parameter provides the base value from the media (RTP) ports that are assigned for
various lines and the different call-sessions that may exist within an end-point. Odd port
values are not recommended. If an Odd Value is entered, the next higher even value is
used as the Media Base Port. This is to conform to the RFC specifications. The range is 1
to 65500. (Default port is 5000)
STUN Parameters:
This section configures for the NAT Traversal technique support in VOIP ATA.
STUN: