Filter
Top Products
Installing the Setup Port Cable 3-3
Connecting to the Setup Port
Connecting to the Setup Port
To connect to the setup port on the module, complete the following steps:
The following legend identifies the setup port cabling in Figure 3-1:
Step Action
1 Ensure that the transmit and receive baud rates on the setup port device
are set to 9600 baud, 8-bits, no parity.
2 Connect the setup port device to the setup port connector on the
DIGITAL MultiSwitch 900.
Item Description
1 Out-of-Band Management (OBM) Port
2 Setup Port
3 Setup Port Cable
4 Setup Port Device