Filter
Top Products
Configuring the Module in a DIGITAL MultiSwitch 900 4-5
Using Menus to Configure the Module
Using Menus to Configure the Module
The following screen shows the options available from the VNswitch 900GV
INSTALLATION MENU when the module is operating in a MultiSwitch 900
configuration. Depending on the configuration state of the module, some options may
not appear.
Note that when your module is installed in the MultiSwitch 900, the slot number where
the module is installed appears at the top of the menu.
VNswitch 900GV
===========================================================
VNswitch 900GV INSTALLATION MENU
[1] Restart with Factory Defaults
[2] Restart with Current Settings
[3] Show Current Settings
[4] Configure IP
[5] Go to Local Console
===========================================================
Enter selection: n <Return>
- slot 3
[Ctrl/C] Return to Chassis Manager Installation Menu
[6] Product-Specific Options...