Filter
Top Products
[3] Show Current Settings
4-8 Configuring the Module in a DIGITAL MultiSwitch 900
[3] Show Current Settings
This option shows the module’s current settings. If the module is being configured for
the first time, some fields will be blank. The read/write community name is case
sensitive.
The following example shows the display associated with this option:
===================================================================
SysUpTime : 6 days 00:03:18 2 resets
SNMP Read/Write Community : public
Interface IP Address Subnet Mask Other Info
In-Band 16.20.216.91 255.255.255.0 08-00-2B-A6-0E-05
OBM Port 16.20.66.156 255.255.255.0 Speed 9600 bps
Press Return for Main Menu...
====================================================================
VNswitch 900GV
- slot 3
VNswitch 900GV, 1 GigabitEth, DME Pass 4, HW=,RO=x,#525, SW=V2.2
Deafult Gateway: : Not configured
SNMP Trap Addresses : None Configured