Filter
Top Products
Configuring the Module in a DIGITAL MultiSwitch 900 4-19
[10] Product-Specific Options (MultiSwitch 900)
[10] Product-Specific Options (MultiSwitch 900)
This option provides product-specific selections when you are using a MultiSwitch
900. When selected, the option allows you to enable and disable the automatic VNbus
connection.
If you select the option [1] Enable/Disable Automatic VNbus
Connection the following menu appears:
[1] Enable/Disable Automatic VNbus Connection
=======================================================
PRODUCT-SPECIFIC OPTIONS
[2] Return to Main Menu
DIGITAL MultiSwitch 900
Enter selection:
DIGITAL MultiSwitch 900
ENABLE / DISABLE AUTOMATIC VNbus CONNECTION
Enabling Automatic VNbus Connection means that certain backplane
channels will be reserved for a VNbus. The channels will be reserved
reserved as soon as this feature is Enabled, and will remain
reserved until this feature is Disabled. When a VNswitch module
is inserted into the chassis, it will connect automatically to the
VNbus. The Enable function will return an error if backplane channels
cannot be reserved due to existing conditions.
Disabling Automatic VNbus Connection means that no backplane channels
will be reserved for a VNbus. Inserting VNswitch modules will not
create connections to a VNbus. If any VNswitch modules are
connected to a VNbus when the Disable mode is selected, the VNbus
will remain until the last VNswitch module is removed from the chassis.
====================================================================
====================================================================
Automatic VNbus connection is Enabled. Would you like to Disable it? [N]
Press Return for Product-Specific Options Menu ...