Filter
Top Products
[4] Configure IP
4-16 Configuring the Module in a DIGITAL MultiSwitch 900
[6] Set Default Gateway
This option sets the default gateway, if necessary. This is the address the module uses
when communicating with a remote host. The default gateway address must be in the
same subnet as your in-band address.
The following example shows the dialog associated with this option:
===========================================================
SET IN-BAND INTERFACE DEFAULT GATEWAY ADDRESS
example: 16.20.40.156
To delete the address, enter 0 in the appropriate
address field.
===========================================================
Default Gateway [] : 16.126.16.254 <Return>
Default Gateway Address Set.
Press Return for IP Configuration Menu . . .
Format: The standard 4 octet dotted decimal notation in which
octet of the address is represented as a decimal
by a ’.’ character.
each
value, separated
VNswitch 900GV
- slot 3