Filter
Top Products
145P, S, A, and M Modes
D Measuring Preset White Balance
If no operations are performed while the displays are flashing, direct
measurement mode will end in the time selected for Custom Setting
c2 (Auto off timers; 0 253).
D Preset White Balance
The camera can store only one value for preset white balance at a time;
the existing value will be replaced when a new value is measured.
Note that exposure is automatically increased by 1EV when measuring
white balance; when shooting in mode M, adjust exposure so that the
exposure indicator shows ±0 (0120).
A Other Methods for Measuring Preset White Balance
To enter preset measurement mode (see above) after selecting preset
white balance in the information display (0137), press J for a few
seconds.
If white balance has been assigned to the Fn button (0265),
white balance preset measurement mode can be activated by keeping
the Fn button pressed for a few seconds after selecting preset white
balance with the Fn button and command dial.
A Gray Panels
For more precise results, measure white balance using a standard gray
panel.