Filter
Top Products
27Introduction
Follow the eight steps below to ready the camera for use.
1 Attach the strap.
Attach the strap as shown. Repeat for the second eyelet.
2 Charge the battery.
If a plug adapter is supplied, raise the wall plug and connect
the plug adapter as shown below at left, making sure the
plug is fully inserted.
Insert the battery and plug the charger
in.
An exhausted battery will fully charge in about an hour
and 50 minutes.
First Steps
A The Battery and Charger
Read and follow the warnings and cautions on pages xi–xiv and 343–347
of this manual.
Battery charging
Charging complete