Filter
Top Products
CC100 Master Bridge User’s Guide
Master
Privacy Mode
EP
Privacy Mode
On Off
On
9 (Key m ch) at
8 (Key not match)
8
Off
8 9(factory default)
9: EP can access the network
8: EP can’t access the network
Upgrading the EP’s HCNA driver is the only way to change the EP’s ‘Privacy Mode’ and ‘Privacy Key’—by
applying the setting values of the Master HCNA device to selected EP’s.
Profile Status for Master and EP
Each listed device status can also be classified by the shown background color:
Green: For Master, the ‘Privacy Mode/Key’ working values in device is consistent with the profile stored setting
values in the CC100. For EP, it can access the network.
Yellow: For Master, it has inconsistent ‘Privacy Mode/Key’ settings. You may upgrade the Master’s driver to
synchronize its working values. (to replace the running working values with the setting ones).
Red: For banned EP’s, either ‘Privacy Mode/Key’ in the EP is not matched or the ‘Host Limit’ value in the EP
is 0. The CC100 will refuse to serve this EP.
EP HomePNA Properties (HPNA)
EP’s (either Smart or not) conform to the following HomePNA settings stored in the CC100 Master,
Note
Footnote to the EP (user).
Host Limit
Specify the maximum allowable host (as PC) numbers attached on this EP:
0: Service is disabled, no host is allowed
1~11: The factory default value is 11 for unrestricted.
13